Small Size / Strong PowerEpoxy Thermistor Longevity Of Service
Epoxy resins are often used to protect NTC thermistors which can damage and impair performance. In high strength epoxies, a lot of chemicals are needed to protect the thermistor. Industrial grade epoxy resin has strong thermal conductivity and high dielectric strength.
Epoxy coated NTC thermistors are teardrop shaped with a bead and two radial leads. These thermistors are often found in environments and applications where moisture is present. Epoxy-coated NTC thermistors are commonly found in medical equipment used to measure air temperature and air flow. They are also used in automotive applications to control and monitor seat heating functions and room air conditioning. Due to the damaging conditions of cold climates, it is not uncommon to find epoxy bead thermistors in green energy equipment such as wind turbines. When the turbine encounters freezing rain and the air temperature is below freezing point, the icing of the blades will reduce the power and increase the load on the rotor.
Application:
1. Heater, Warmer, Automobile air conditioners, Refrigerators, Freezers,
2. Water heaters, Gas boiler, Electric kettles, Wall-hung gas boiler, Water dispensers,
3. Toaster, Microwave oven, Air dryer, Roasting pan, Induction cooker, Electric hot plate,
4. Iron, Garment steamer, Hair straighten, Coffee maker, Coffee pot,
6. Rice cooker, Incubator temperature control, Egg boiler, etc.
|
|
Steady operation for long period
|
High testing precition
|
Good coherence and interchange
|
Wide range of resistance
|
Easy for auto-installation
|
Small size, Strong frame, light weight
|
Feature
| Temperature range |
-40ºC to +125ºC |
| Type |
Epoxy Encapsulated Sensor
|
| Voltage |
24VDC |
| Accuracy |
1%, 2%,5% |
|
Interchangeability
|
Available with 0.1°C and 0.2°C |
| Resistance |
1kOhm to 200kOhm
|
| Resistance at 25 degrees C |
10K +- 1%
|
| Size |
customized |
Advantage
-
high quality, low cost sensors
-
Epoxy coating for hermeticity from environment
-
Custom size and wire configuration,
-
Available with 0.1°C and 0.2°C Interchangeability
-
Avaliable for custom size and wire configuration
-
Excellent endurance against thermal shock
Application
It can be used in a wide range of applications from concrete monitoring, explosive testing, as well as soil monitoring and climate control.
Our services
1. Good quality is assured by advanced manufacturing technique.
2. All products will be checked by our quality-control department.
3. Customized design. OEM & ODM is accepted.
Advantages
1. Small quantity is accepted.
2. Well and strict quality control.
3. We have series ex-factory tests before shipment, such as pulling test, high & low temperature test, drop test, temperature cycling experiment etc.
Product Tags:
|
|
1k Ohm NTC Thermistors For Temperature Measurement Epoxy Resin Images
|
